Differences between revisions 30 and 31
Revision 30 as of 2018-03-15 10:44:43
Size: 5941
Editor: cpe-120-145-129-132
Revision 31 as of 2018-03-21 10:16:08
Size: 5861
Editor: cpe-120-145-129-132
Deletions are marked like this. Additions are marked like this.
Line 158: Line 158:

dispense no longer has to back onto LDAP, so once Merlo is converted then things should just work
 * Windows server (Maaxen)
 * Mail delivery (dovecot)
Line 163: Line 163:
 * Windows server (Maaxen)
Line 171: Line 171:
 * Mail delivery (postfix, procmail, dovecot, all that fun stuff)  * Mail delivery (postfix, procmail, all that fun stuff)

This page is for describing the migration and current setup of the Active Directory domain at UCC.

The Active Directory domain at UCC will be ad.ucc.gu.uwa.edu.au. The primary DNS server for domain is samson.ucc.gu.uwa.edu.au. The primary DC for domain is also samson.ucc.gu.uwa.edu.au.

Upgrade/Setup Process

Domain Controllers

ad.ucc.gu.uwa.edu.au is delegated using separate zones in Mooneye's /etc/bind/named.conf.local

Samson's domain is set up by:

  • apt install samba chrony krb5-user sssd sssd-ad sssd-krb5 sssd-tools libpam-krb5 libpam-sss libnss-sss

  • Disable the systemd units for the non-DC setup & default configuration:

systemctl stop smbd
systemctl stop nmbd
systemctl stop winbind
systemctl disable smbd
systemctl disable nmbd
systemctl disable winbind
rm /etc/samba/smb.conf

If upgrading from the old NT domain do:

  • scp [email protected]:/usr/local/etc/smb4.conf /opt/smb.conf.pdc

  • scp [email protected]:/var/db/samba4/\*.tdb /opt/samba-db/

  • scp [email protected]:/var/db/samba4/private/\*.tdb /opt/samba-db/

  • Change "UCCDOMAIN" to "UCCDOMAYNE" and Mussel's hostname to an IP address in /opt/smb.conf.pdc

  • Comment out the ZFS-specific entries in /opt/smb.conf.pdc.

  • samba-tool domain classicupgrade --use-xattrs=yes --realm adtest.ucc.gu.uwa.edu.au --dbdir=/opt/samba-db --dns-backend=SAMBA_INTERNAL --verbose /opt/smb.conf.pdc

Otherwise when adding additional DC's to an existing domain:

  • Set the following settings in /etc/krb5.conf:

        default_realm = ad.ucc.gu.uwa.edu.au
        dns_lookup_realm = false
        dns_lookup_kdc = true
  • verify kerberos with: kinit <username>

  • join the domain with: samba-tool domain join ad.ucc.gu.uwa.edu.au DC -U"UCCDOMAYNE\username" --dns-backend=SAMBA_INTERNAL --option='idmap_ldb:use rfc2307 = yes'

  • replicate the SYSVOL directory to the new DC, then fix the permissions with: samba-tool ntacl sysvolreset

  • start the samba service, the service may have a different name depending on the samba version used.

  service samba-ad-dc enable
  service samba-ad-dc start

For all domain controllers

  • copy /etc/nsswitch.conf and /etc/sssd/sssd.conf from another domain controller

  • enable sssd auth in pam via pam-auth-update

  • DO NOT use winbind on a Domain controller, it sucks formultiple reasons.

Windows systems

Just join them to the domain. Doesn't look like you need to create a machine account before joining?

Linux systems

Based on the instructions from https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member and https://wiki.samba.org/index.php/Authenticating_Domain_Users_Using_PAM Before configuring the domain ensure the following:

  • Install the required packages: apt install samba winbind krb5-user libpam-krb5 libpam-winbind libnss-winbind

  • Ensure the system is configured according to the SOE.

  • edit /etc/krb5.conf to point to the new domain:

        default_realm = ad.ucc.gu.uwa.edu.au
        dns_lookup_realm = false
        dns_lookup_kdc = true
  • Make the following /etc/samba/smb.conf:

# Configure the domain infomation
        security = ads
        realm = ad.ucc.gu.uwa.edu.au
        workgroup = UCCDOMAYNE

# use winbind to map users and groups
        winbind enum users = yes
        winbind enum groups = yes
        winbind use default domain = yes
        kerberos method = secrets and keytab

#Config gid/sid mapping based on AD attributes
        winbind nss info = rfc2307

        idmap config * : backend = tdb
        idmap config * : range = 13000-17999
        #idmap config for UCCDOMAYNE
        idmap config UCCDOMAYNE:backend = ad
        idmap config UCCDOMAYNE:schema_mode = rfc2307
        idmap config UCCDOMAYNE:range = 1-999999
        idmap config UCCDOMAYNE:unix_primary_group = yes
  • Join the machine to the domain with: net ads join -U <username>.

  • configure pam using pam-auth-update and enable Winbind NT/AD authentication.

  • configure nsswitch.conf

# /etc/nsswitch.conf
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

passwd:         compat winbind
group:          compat winbind
shadow:         files
gshadow:        files

hosts:          files mdns4_minimal [NOTFOUND=return] dns
networks:       files

protocols:      db files
services:       db files 
ethers:         db files
rpc:            db files

netgroup:       nis 
  • start the services:

  • Make sure the computer can fetch the domain users and groups with:

wbinfo -g and wbinfo -u

Things using LDAP

Anything that needs to bind to ldap to get a list of users can no longer do so anonymously. Encryption is still required. In AD, create a new bind user for the service called bind-<servicename>, put it in the Service Accounts group, and remove it from the Domain Users group. Then you can use this user to bind to the server.

Converted systems

  • Windows desktops
  • Linux desktops
  • Linux servers
    • Motsugo
    • Merlo
    • Mooneye
  • FreeBSD servers
    • Molmol
  • Webmail?
  • Adduser scripts
  • Proxmox
  • RADIUS (VPN & wireless)

  • Windows server (Maaxen)
  • Mail delivery (dovecot)

Unconverted systems

  • Linux servers
    • Mussel
    • Other machines
  • FreeBSD servers
    • Musdea
  • Solaris machines
  • Mac machines
  • Mail delivery (postfix, procmail, all that fun stuff)