Differences between revisions 4 and 6 (spanning 2 versions)
Revision 4 as of 2010-04-17 03:47:20
Size: 219
Editor: 211
Comment: AhtEAV <a href="http://cmtoyzocmzjt.com/">cmtoyzocmzjt</a>, [url=http://xrcvknawacro.com/]xrcvknawacro[/url], [link=http://adrrwccemrnq.com/]adrrwccemrnq[/link], http://hmmfgwmffnac.com/
Revision 6 as of 2010-08-30 12:41:21
Size: 1314
Editor: BobAdamson
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
AhtEAV <a href="http://cmtoyzocmzjt.com/">cmtoyzocmzjt</a>, [url=http://xrcvknawacro.com/]xrcvknawacro[/url], [link=http://adrrwccemrnq.com/]adrrwccemrnq[/link], http://hmmfgwmffnac.com/ If the door sensors die:

 * On Mussel, as root:
{{{
/etc/init.d/uccdoors stop
/etc/init.d/latd restart
/etc/init.d/uccdoors start
}}}

 * On Madako, as root:
{{{
moprc -i eth0.2 janus
<enter password>
<enter username (UCC)>
set priv
<enter privilege password>
init del 0
}}}

Not all these steps may be necessary - often, resetting the DECterm (second item above) will do the trick.

== Some tricks and lessons learned ==
 * The door solenoid requires a fair bit of power, the huge power supply in the machine room is huge because it needs to be. Don't try and substitute it with a wall wart.
 * Similarly, the door solenoid struggles for power when you try and power it with only 2 of the 4 wires. Instead, connect 2 wires to each terminal.
 * The modem takes 12V, so does the solenoid - don't try giving it 9V, it doesn't like it
 * To test if you have connectivity to the modem:
  * From mussel:
  . {{{
llogin door -w-
}}}
  * Enter the password
  * From here you can send characters to the modem (they won't come up on the screen though)
  * Watch the lights on the front of the modem, one of them should turn on and flicker when you're sending data
  * To manually open the door over serial type ATH1F (case sensitive) and hit enter
 
Line 3: Line 37:
CategoryProjectsActive CategorySystemAdministration

If the door sensors die:

  • On Mussel, as root:

/etc/init.d/uccdoors stop
/etc/init.d/latd restart
/etc/init.d/uccdoors start
  • On Madako, as root:

moprc -i eth0.2 janus
<enter password>
<enter username (UCC)>
set priv
<enter privilege password>
init del 0

Not all these steps may be necessary - often, resetting the DECterm (second item above) will do the trick.

Some tricks and lessons learned

  • The door solenoid requires a fair bit of power, the huge power supply in the machine room is huge because it needs to be. Don't try and substitute it with a wall wart.
  • Similarly, the door solenoid struggles for power when you try and power it with only 2 of the 4 wires. Instead, connect 2 wires to each terminal.
  • The modem takes 12V, so does the solenoid - don't try giving it 9V, it doesn't like it
  • To test if you have connectivity to the modem:
    • From mussel:
    • llogin door -w-
    • Enter the password
    • From here you can send characters to the modem (they won't come up on the screen though)
    • Watch the lights on the front of the modem, one of them should turn on and flicker when you're sending data
    • To manually open the door over serial type ATH1F (case sensitive) and hit enter


CategorySystemAdministration