Differences between revisions 12 and 13
Revision 12 as of 2008-08-19 18:36:29
Size: 1189
Editor: LukeWilliams
Comment: no it doesn't
Revision 13 as of 2008-08-20 00:51:57
Size: 1227
Editor: LukeWilliams
Comment:
Deletions are marked like this. Additions are marked like this.
Line 20: Line 20:

----
CategorySystemAdministration

Lorenzo

SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Use 'show int status' to get started.

Lorenzo has eight broken interfaces. You can tell which ones are broken because they are filled with silicon filler, though this is an effect rather than a cause.

Curviceps

Can only be configured by via web interface, which is at [http://curviceps.ucc.gu.uwa.edu.au]. This is on the management VLAN, which is only routed from inside the UCC.

Olive

Telnet to it by hostname (olive.ucc.asn.au) or IP (130.95.13.5). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it. Use 'show int status' to get started.

Alloy

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.


CategorySystemAdministration