Lorenzo

SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Use 'show int status' to get started.

Lorenzo has eight broken interfaces. You can tell which ones are broken because they are filled with silicon filler, though this is an effect rather than a cause.

Curviceps

Can only be configured by via web interface, which is at http://curviceps.ucc.gu.uwa.edu.au. This is on the management VLAN, which is only routed from inside the UCC.

Olive

Telnet to it by hostname (olive.ucc.asn.au) or IP (130.95.13.5). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it. Use 'show int status' to get started.

Port    Name               Status       Vlan     Duplex Speed   Type
------- ------------------ ------------ -------- ------ ------- ----
Fa0/1   Unused             disabled     3          Auto    Auto 100BaseTX/FX
Fa0/2   Unused             notconnect   8          Auto    Auto 100BaseTX/FX
Fa0/3   Unused             connected    trunk    A-Full   A-100 100BaseTX/FX
Fa0/4   Unused             notconnect   2          Auto    Auto 100BaseTX/FX
Fa0/5   Unused             notconnect   2          Auto    Auto 100BaseTX/FX
Fa0/6   Unused             notconnect   3          Auto    Auto 100BaseTX/FX
Fa0/7   Unused             notconnect   2          Full    Auto 100BaseTX/FX
Fa0/8   Unused             notconnect   trunk      Auto    Auto 100BaseTX/FX
Fa0/9   Unused             notconnect   2          Auto    Auto 100BaseTX/FX
Fa0/10  Unused             notconnect   3          Auto    Auto 100BaseTX/FX
Fa0/11  Lorenzo (temp)     notconnect   trunk      Auto    Auto 100BaseTX/FX
Fa0/12  Unused             disabled     trunk      Auto    Auto 100BaseTX/FX
Fa0/13  Flying switch      notconnect   3          Auto    Auto 100BaseTX/FX
Fa0/14  evil               notconnect   trunk      Auto    Auto 100BaseTX/FX
Fa0/15  Pitch              notconnect   3          Auto    Auto 100BaseTX/FX
Fa0/16  Unused             notconnect   3          Auto    Auto 100BaseTX/FX
Fa0/17  Adrian's Server (m notconnect   3          Auto     100 100BaseTX/FX
Fa0/18  UGG AP (802.11g)   notconnect   6          Auto    Auto 100BaseTX/FX
Fa0/19  Madako             notconnect   13         Auto    Auto 100BaseTX/FX
Fa0/20  Uplink (Guild)     notconnect   trunk      Auto    Auto 100BaseTX/FX
Fa0/21  Uplink (Loft)      notconnect   5          Auto    Auto 100BaseTX/FX
Fa0/22  Dagon              notconnect   2          Full      10 100BaseTX/FX
Fa0/23  Bench port 6       notconnect   3          Full     100 100BaseTX/FX
Fa0/24  Loftnet Spare      notconnect   3          Auto    Auto 100BaseTX/FX

Alloy

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.

CategorySystemAdministration