|
Size: 593
Comment:
|
Size: 921
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 1: | Line 1: |
| == The shitty alloy switch == | ## page was renamed from NetworkStuff |
| Line 3: | Line 3: |
| The actual default IP is 192.168.1.1. This is in conflict to the incorrect [http://www.alloy.com.au/web_download/Switch/GSS%20Series/GSS24T2SFP/ manual]. The password is 'admin'. | == Lorenzo == |
| Line 5: | Line 5: |
| To access the Web interface, you'll need to port-forward through Madako: | SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. |
| Line 7: | Line 7: |
| {{{ ssh -L 10080:192.168.1.1:80 [email protected] }}} |
== Curviceps == |
| Line 11: | Line 9: |
| ... and then open http://localhost:10080/ in an SSL-enabled browser of your choice. | Can only be configured by via web interface, which can only be accessed via port-forwarding through madako. Its IP address is 192.168.2.10. |
| Line 13: | Line 11: |
| Config: [http://matt.ucc.asn.au/alloy/PVID.png] [http://matt.ucc.asn.au/alloy/VLAN.png] |
== Olive == |
| Line 17: | Line 13: |
| Older config: http://trs80.ucc.asn.au/status.html | Telnet to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it. == Alloy == Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'. |
Lorenzo
SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you.
Curviceps
Can only be configured by via web interface, which can only be accessed via port-forwarding through madako. Its IP address is 192.168.2.10.
Olive
Telnet to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it.
Alloy
Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.
