Differences between revisions 8 and 9
Revision 8 as of 2008-08-19 16:13:30
Size: 632
Editor: LukeWilliams
Comment:
Revision 9 as of 2008-08-19 16:27:45
Size: 921
Editor: LukeWilliams
Comment:
Deletions are marked like this. Additions are marked like this.
Line 2: Line 2:
== The shitty alloy switch ==
Line 4: Line 3:
The actual default IP is 192.168.1.1. This is in conflict to the incorrect [http://www.alloy.com.au/web_download/Switch/GSS%20Series/GSS24T2SFP/ manual]. The password is 'admin'. == Lorenzo ==
Line 6: Line 5:
To access the Web interface, you'll need to port-forward through Madako: SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you.
Line 8: Line 7:
{{{
ssh -L 10080:192.168.1.1:80 root@madako.ucc.gu.uwa.edu.au
}}}
== Curviceps ==
Line 12: Line 9:
... and then open http://localhost:10080/ in an SSL-enabled browser of your choice. Can only be configured by via web interface, which can only be accessed via port-forwarding through madako. Its IP address is 192.168.2.10.
Line 14: Line 11:
Config:
[http://matt.ucc.asn.au/alloy/PVID.png]
[http://matt.ucc.asn.au/alloy/VLAN.png]
== Olive ==
Line 18: Line 13:
Older config: http://trs80.ucc.asn.au/status.html Telnet to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it.

== Alloy ==

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.

Lorenzo

SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you.

Curviceps

Can only be configured by via web interface, which can only be accessed via port-forwarding through madako. Its IP address is 192.168.2.10.

Olive

Telnet to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it.

Alloy

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.