Revision 15 as of 2009-12-23 14:50:52

Clear message

Lorenzo

SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Use 'show int status' to get started.

Lorenzo has eight broken interfaces. You can tell which ones are broken because they are filled with silicon filler, though this is an effect rather than a cause.

Curviceps

Can only be configured by via web interface, which is at http://curviceps.ucc.gu.uwa.edu.au. This is on the management VLAN, which is only routed from inside the UCC.

Olive

Telnet to it by hostname (olive.ucc.asn.au) or IP (130.95.13.5). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it. Use 'show int status' to get started.

{{{Port Name Status Vlan Duplex Speed Type








Fa0/1 Unused disabled 3 Auto Auto 100BaseTX/FX Fa0/2 Unused notconnect 8 Auto Auto 100BaseTX/FX Fa0/3 Unused connected trunk A-Full A-100 100BaseTX/FX Fa0/4 Unused notconnect 2 Auto Auto 100BaseTX/FX Fa0/5 Unused notconnect 2 Auto Auto 100BaseTX/FX Fa0/6 Unused notconnect 3 Auto Auto 100BaseTX/FX Fa0/7 Unused notconnect 2 Full Auto 100BaseTX/FX Fa0/8 Unused notconnect trunk Auto Auto 100BaseTX/FX Fa0/9 Unused notconnect 2 Auto Auto 100BaseTX/FX Fa0/10 Unused notconnect 3 Auto Auto 100BaseTX/FX Fa0/11 Lorenzo (temp) notconnect trunk Auto Auto 100BaseTX/FX Fa0/12 Unused disabled trunk Auto Auto 100BaseTX/FX Fa0/13 Flying switch notconnect 3 Auto Auto 100BaseTX/FX Fa0/14 evil notconnect trunk Auto Auto 100BaseTX/FX Fa0/15 Pitch notconnect 3 Auto Auto 100BaseTX/FX Fa0/16 Unused notconnect 3 Auto Auto 100BaseTX/FX Fa0/17 Adrian's Server (m notconnect 3 Auto 100 100BaseTX/FX Fa0/18 UGG AP (802.11g) notconnect 6 Auto Auto 100BaseTX/FX Fa0/19 Madako notconnect 13 Auto Auto 100BaseTX/FX Fa0/20 Uplink (Guild) notconnect trunk Auto Auto 100BaseTX/FX Fa0/21 Uplink (Loft) notconnect 5 Auto Auto 100BaseTX/FX Fa0/22 Dagon notconnect 2 Full 10 100BaseTX/FX Fa0/23 Bench port 6 notconnect 3 Full 100 100BaseTX/FX Fa0/24 Loftnet Spare notconnect 3 Auto Auto 100BaseTX/FX }}}

Alloy

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.


CategorySystemAdministration