Understanding UCC's network can be a bit challenging at first, but after some reading you'll find that it is actually very challenging, and give up. This article is a general overview of how it works. TableOfContents

Layer One

Uplink

There is a long piece of CAT5 running through the walls from the machine room to the Guild machine room in Cameron Hall (across from UWAnime). This plugs in to a 100M D-Link media converter, which leads to a similar media converter in the Guild comms room in the main Guild building. Our uplink is into an ITS managed switch called 'cruzob'. If your're looking for where the cable runs, it's possibly disguised as a network outlet cable in one of the other student clubrooms.

Machine Room

The machine rooms contains two core switches and a router:

• Lorenzo, a 48-port Cisco Catalyst 2950 series with some dead ports and dual gigabit uplinks.
• Curviceps, a 24-port HP Procurve with full gig ports.
• Madako, a linux-based router running iptables.

These are all labeled and in the rack. There is also a patch panel for the clubroom wall-ports at the top of the rack.

Clubroom

There is CAT5 cabling run from a patch panel at the top of the rack to a number of wall ports throughout the room. Where not enough wall-ports are available, there are small 5-port unmanaged switches used to attach more devices to the network.

Layer Two

Internal VLANs

UCC uses seven VLANs internally for various purposes:

• VLAN 1: Network and server management.
• VLAN 2: Machine room network.
• VLAN 3: Clubroom network.
• VLAN 5: Loft network (used for LANs).
• VLAN 6: Wireless network.
• VLAN 7: Printers. (currently largely unused)
• VLAN 8: Netboot (Ubuntu port)

External VLANs

ITS trunks to us the following VLANs:

• VLAN 11: SNAP.
• VLAN 13: Our main uplink, provides us our internet connection and address space.
• VLAN 102: Guild clubs. Not used by UCC, forwarded on to UniSFA.

Layer Three

Layer three at UCC is pretty nasty, and the firewall script alone probably deserves its own article. However, a brief summary of how it all works:

Subnets

There are a number of IP ranges used at UCC for various things:

• 130.95.13.0/24 is the public address space for our AARNet connection. Incoming, non-peering traffic to these addresses is charged at 4c/mb. This range is routed to us via VLAN 13.
  • 130.95.13.0/26 is the machine room address range, internally routed on VLAN 2.
  • 130.95.13.64/26 is the clubroom address range, internally routed on VLAN 3.
• 203.24.97.249/29 is the public address space for our Silk connection. Traffic to and from these addresses is unmetered. This range is also routed to us via VLAN 13.
• 10.13.13.0/24 is a private range used for network printers. These addresses reside on VLAN 7 and are not routed outside.
• 10.203.13.0/24 is our address range on the Resnet (college) network. Routed via VLAN 13.
• 172.26.42.0/24 is for 'untrusted client machines' - there is some history here, but they are never routed outside the Uni (unless NAT is involved, which it is).
  • 172.26.42.8/29 is the Ubuntu Port (netboot install) network.
  • 172.26.42.96/27 is the range we use for PPTP.
  • 172.26.42.128/26 is the loft network range.
  • 172.26.42.192/27 is the 'ugg' wireless network range
  • 172.26.24.224/27 is used by Flying for the 'ucc' wireless network, currently unavailable.
• 10.11.0.0/24 on the SNAP vlan (10.11.0.0/16 in total) is not leased out by the central SNAP dhcp server, so some IPs in this range can be taken for services. Currently 10.11.0.13 is the UCC SNAP SSH forward (which ends up at martello) and .11 is used by evil.

Addressing scheme

Most of UCC's subnets use DHCP to assign addresses based on MAC address. Further details can be found at ["Network/Services#DHCP"].

Routing and Firewall

Madako, the Linux router, is a beast of burden. See ["Network/Firewall"] for further information on the way it operates.

IPv6

UCC has 2002:825f:d03:4080::/58 (which is 2002:825f:d03:4080:: to :40bf:: inclusive). This is advertised by radvd on madako which most machines autoconfigure from, however some machines have statically assigned addresses. There is a rudimentary IPv6 firewall. IPv6 traffic is free.

Multicast

UWA runs multicast in sparse PIM mode, and madako runs pimd as noted [http://lists.ucc.gu.uwa.edu.au/pipermail/ucc/2006-October/013668.html here]. Make sure pimd is only listening once per interface, otherwise things won't work quite right. Multicast traffic is also free.

Higher Layers

All HTTP goes through mooneye, and is proxied to various other machines for processing, primarily mussel. HTTPS is served by mussel on secure.ucc.asn.au, however IMAPS, POPS and SMTPS are NATted by madako to go to mooneye, since we're cheap and only have one SSL certificate.

Lots of port 80 traffic somehow gets slurped up by a cacheboy http proxy maintained by [AHC].

There is sometimes a PPTP server running on madako, though SSH tends to be the most reliable protocol for tunneling about UWA.

Configuration

Information on configuring the core switches can be found at ["Network/SwitchConfiguration"]. Information on configuring routing and firewalling can be found at ["Network/Firewall"].

Monitoring

There are various monitoring packages installed, links to which can be found on MissionControl.

CategorySystemAdministration