Differences between revisions 6 and 20 (spanning 14 versions)

UCC Theft Book

Stuff Lifted

Date: Name: Item
Tue 20111220: [NTU]: Dive into Python 3 book
Thu 20111013: Mark Tearle [MTL] + UWA BIP: 10 new orange fibre patch cables (will discuss replacement/reimbursement with [MRD])
Wed 20111012: Nick Bannon [NTU]: UCN5841A relay board
Sun 20110619: Mark Tearle [MTL]: Laminator
Mon 20110321: Sam Moore [SZM]: "The Robot Builder's Bonanza"
Tue 20110419: Colin Siew (niloc): "The Motorola MC68332 Microcontroller" Thomas L Harman (RETURNED Fri 20110513)
Mon 20120102: [DAA]: 15V power supply
20120203: [BOB]: the laminator, the label maker (with all three tapes) and the scalpel with the blades
20120302: [UNISFA]: 2 metal angle brackets (~15 cm) from tool cupboard. (now attached to unisfa wall. Will presumably be replaced, or returned when suitable brackets can be purchaced. Take up with unisfa commitee)
(20120320: UniSFA: Spare 1050p screen (was unused, will return in 2 weeks or when asked)
201202sometime: [DJA] PoE injector and PSU
20120327: [DJA] PS2 Keyboard
20120414: [DJA] 4 x network cables + 1 x consumer switch + psu.

-  ⇤ ← Revision 6 as of 2011-10-13 00:34:25 → 
  Size: 366
  Editor: NickBannon
  Comment: NTU borrowing relay board
+   ← Revision 20 as of 2012-04-14 14:48:17 → ⇥
  Size: 1163
  Editor: cabellera
  Comment: borrowing
-Deletions are marked like this.
+Additions are marked like this.
 Line 4:
-   * Wed 20111012: Nick Bannon (nick): UCN5841A relay board
 * Sun 20110619: Mark Tearle (mtearle): Laminator
 * Mon 20110321: Sam Moore (matches): "The Robot Builder's Bonanza"
+ * Tue 20111220: [NTU]: Dive into Python 3 book
 * Thu 20111013: Mark Tearle [MTL] + UWA BIP: 10 new orange fibre patch cables (will discuss replacement/reimbursement with [MRD])
 * Wed 20111012: Nick Bannon [NTU]: UCN5841A relay board
 * --(Sun 20110619: Mark Tearle [MTL]: Laminator)--
 * Mon 20110321: Sam Moore [SZM]: "The Robot Builder's Bonanza"
-Line 9:
+Line 11:
+ * Mon 20120102: [DAA]: 15V power supply
 * --(20120203: [BOB]: the laminator, the label maker (with all three tapes) and the scalpel with the blades)--
 * --(20120302: [UNISFA]: 2 metal angle brackets (~15 cm) from tool cupboard. (now attached to unisfa wall. Will presumably be replaced, or returned when suitable brackets can be purchaced. Take up with unisfa commitee))--
 * (20120320: UniSFA: Spare 1050p screen (was unused, will return in 2 weeks or when asked)
 * 201202sometime: [DJA] PoE injector and PSU
 * 20120327: [DJA] PS2 Keyboard
 * 20120414: [DJA] 4 x network cables + 1 x consumer switch + psu.