|Deletions are marked like this.||Additions are marked like this.|
|Line 24:||Line 24:|
|Line 27:||Line 29:|
|Well...yeah...it hasn't really broken since it got replaced, so this process is still being worked out.||Symptom: Cries of "The door's broken." Door relay doesn't activate from snack machine, dispense or serial from Merlo.<<BR>>
Cause: The seeduino program seems to hang.<<BR>>
Fix: Restart seeduino (unplug/replug), then restart vendserver.<<BR>>
The Door Lock
Hi All, The modem has now been replaced with the arduino and the small 5v relay board. It's working for now, but it's a hack and not even properly boxed up. [TPG] has already modified dispense to suit it. If it breaks, I'll let you keep the pieces. For posterity, here are the super-sekret settings and commands: Serial over USB connected to merlo, 115200 8n1 Type "2;" and it will respond with "1,The UCC door is alive;" Type "4;" and it will respond with "1,Opening door;" , keep the lock open for ten seconds and then say "1,Locking door;". The command codes are strange numbers because I hacked the CmdMessenger  library example to do the job. I've found using picocom to check it is easier than minicom. The following command* will start picocom with the correct baud rate and a command character of x: `picocom /dev/ttyUSB0 -e x -b 115200' Bob  http://arduino.cc/playground/Code/CmdMessenger
Fixing the door lock
Symptom: Cries of "The door's broken." Door relay doesn't activate from snack machine, dispense or serial from Merlo.
Cause: The seeduino program seems to hang.
Fix: Restart seeduino (unplug/replug), then restart vendserver.
- - [DTK]