Differences between revisions 14 and 20 (spanning 6 versions)
Revision 14 as of 2009-01-24 19:03:23
Size: 3249
Editor: apollo
Comment: olive's current config
Revision 20 as of 2018-12-06 09:23:12
Size: 1946
Editor: frekk
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
== Lorenzo == == Bitumen ==
Line 5: Line 5:
SSH to it by hostname (lorenzo.ucc.asn.au) or IP (192.168.2.11). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Use 'show int status' to get started. [[Bitumen]] is a Cisco Catalyst 4507R running IOS (the *real* IOS, not the one made by the fruity company). It's configured by SSHing to bitumen.ucc.gu.uwa.edu.au from inside the UCC network. Bitumen's config can also be seen at [[http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/]]
 * All wall ports in the clubroom are connected through bitumen
 * The gigabit uplink goes through bitumen to a separate gigabit port on [[Murasoi]]
 * There are no POE modules installed, but we could probably get some
Line 7: Line 10:
Lorenzo has eight broken interfaces. You can tell which ones are broken because they are filled with silicon filler, though this is an effect rather than a cause. == Walnut ==

See [[Walnut]]. Its configuration is also accessible at [[http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs]].
Line 11: Line 17:
Can only be configured by via web interface, which is at [http://curviceps.ucc.gu.uwa.edu.au]. This is on the management VLAN, which is only routed from inside the UCC. [[Curviceps]] can only be configured by via web interface, which is at [[http://curviceps.ucc.gu.uwa.edu.au]]. This is on the management VLAN, which is only routed from inside the UCC. If at all possible, any machines on this switch should have either ladvd (where available) or lldpd installed so it's easier to tell what ports they're connected to.
Line 13: Line 19:
== Olive == == Coconut ==
Line 15: Line 21:
Telnet to it by hostname (olive.ucc.asn.au) or IP (130.95.13.5). Uses its own set of passwords, so if you don't already have an account on it you'll have to ask someone who does to create one for you. Try to use Lorenzo instead if at all possible, there is a vague plan to retire Olive once everything is off it. Use 'show int status' to get started.

{{{Port Name Status Vlan Duplex Speed Type
------- ------------------ ------------ -------- ------ ------- ----
Fa0/1 Unused disabled 3 Auto Auto 100BaseTX/FX
Fa0/2 Unused notconnect 8 Auto Auto 100BaseTX/FX
Fa0/3 Unused connected trunk A-Full A-100 100BaseTX/FX
Fa0/4 Unused notconnect 2 Auto Auto 100BaseTX/FX
Fa0/5 Unused notconnect 2 Auto Auto 100BaseTX/FX
Fa0/6 Unused notconnect 3 Auto Auto 100BaseTX/FX
Fa0/7 Unused notconnect 2 Full Auto 100BaseTX/FX
Fa0/8 Unused notconnect trunk Auto Auto 100BaseTX/FX
Fa0/9 Unused notconnect 2 Auto Auto 100BaseTX/FX
Fa0/10 Unused notconnect 3 Auto Auto 100BaseTX/FX
Fa0/11 Lorenzo (temp) notconnect trunk Auto Auto 100BaseTX/FX
Fa0/12 Unused disabled trunk Auto Auto 100BaseTX/FX
Fa0/13 Flying switch notconnect 3 Auto Auto 100BaseTX/FX
Fa0/14 evil notconnect trunk Auto Auto 100BaseTX/FX
Fa0/15 Pitch notconnect 3 Auto Auto 100BaseTX/FX
Fa0/16 Unused notconnect 3 Auto Auto 100BaseTX/FX
Fa0/17 Adrian's Server (m notconnect 3 Auto 100 100BaseTX/FX
Fa0/18 UGG AP (802.11g) notconnect 6 Auto Auto 100BaseTX/FX
Fa0/19 Madako notconnect 13 Auto Auto 100BaseTX/FX
Fa0/20 Uplink (Guild) notconnect trunk Auto Auto 100BaseTX/FX
Fa0/21 Uplink (Loft) notconnect 5 Auto Auto 100BaseTX/FX
Fa0/22 Dagon notconnect 2 Full 10 100BaseTX/FX
Fa0/23 Bench port 6 notconnect 3 Full 100 100BaseTX/FX
Fa0/24 Loftnet Spare notconnect 3 Auto Auto 100BaseTX/FX
}}}
[[Coconut]] is a Cisco 2948G running CatOS. It's configured by telnetting to coconut.ucc.gu.uwa.edu.au from inside the UCC network. Coconut's config can also be seen at [[http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/]]
 * Not in use any more, except for camps
Line 49: Line 28:
== Palm ==

The same model as [[Coconut]], this switch is only used for LANs. Every port is set to vlan 5, except port 1 which is a trunk port for connecting the loft cable. When it's connected to the network, you can telnet to it on palm.ucc.gu.uwa.edu.au. Its config can also be seen at [[http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/]]

Bitumen

Bitumen is a Cisco Catalyst 4507R running IOS (the *real* IOS, not the one made by the fruity company). It's configured by SSHing to bitumen.ucc.gu.uwa.edu.au from inside the UCC network. Bitumen's config can also be seen at http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/

  • All wall ports in the clubroom are connected through bitumen
  • The gigabit uplink goes through bitumen to a separate gigabit port on Murasoi

  • There are no POE modules installed, but we could probably get some

Walnut

See Walnut. Its configuration is also accessible at http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs.

Curviceps

Curviceps can only be configured by via web interface, which is at http://curviceps.ucc.gu.uwa.edu.au. This is on the management VLAN, which is only routed from inside the UCC. If at all possible, any machines on this switch should have either ladvd (where available) or lldpd installed so it's easier to tell what ports they're connected to.

Coconut

Coconut is a Cisco 2948G running CatOS. It's configured by telnetting to coconut.ucc.gu.uwa.edu.au from inside the UCC network. Coconut's config can also be seen at http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/

  • Not in use any more, except for camps

Alloy

Not used anymore, except for LANs. The default IP of the Alloy, contrary to what the manual says, is 192.168.1.1. The default password is 'admin'.

Palm

The same model as Coconut, this switch is only used for LANs. Every port is set to vlan 5, except port 1 which is a trunk port for connecting the loft cable. When it's connected to the network, you can telnet to it on palm.ucc.gu.uwa.edu.au. Its config can also be seen at http://cvs.ucc.asn.au/cgi-bin/viewvc.cgi/rancid/ucc/configs/


CategorySystemAdministration