Differences between revisions 11 and 12
Revision 11 as of 2012-12-23 22:25:45
Size: 5247
Editor: BobAdamson
Comment:
Revision 12 as of 2012-12-23 22:38:40
Size: 5414
Editor: BobAdamson
Comment: This may not be necesary with resource pools, but we shall see
Deletions are marked like this. Additions are marked like this.
Line 43: Line 43:
In the comments section on the summary page of the newly created VM, add a comment with the date of creation, the VM's purpose, the name and username of the owner.

Proxmox VE is used by UCC as a virtual machine management infrastructure, and is a lot like vmware. It is based on KVM and OpenVZ, and is built on Debian, which UCC likes because it's FREE.

Installation

Proxmox can be installed using either a baremetal installer iso or an existing Debian installation (check kernel versions as Proxmox replaces the existing kernel). The problem with the baremetal installer is that it does not allow you to set up your own logical volumes and doesn't give you the option of software raid. IT WILL ALSO EAT ANY OTHER DISKS ATTACHED TO THE MACHINE, disconnect disks you don't want lost if using the baremetal installer. So machines such as Medico had Proxmox installed on top of pre-installed Debian Squeeze.

Installation is incredibly easy by following the instructions in the Proxmox VE Installation Page. Ensure that the Debian install follows the UCC almost-standard layout, with separate rootusr, var, boot, and home logical volumes. In addition, ensure there is a vmstore logical volume where virtual machines will be saved.

Things missed by the manual installer

  • The notable instruction that is missing in the wiki page is to enable Kernel Samepage Merging (KSM) on the host, which is a memory de-duplication feature - google how to enable it and enable it with a line in /etc/rc.local (check Motsugo's for an example)

  • The proxmox installer fails to change the network configuration file to be suitable for virtual machines; check out the default configuration in Proxmox Network Model and modify /etc/network/interfaces to suit.

  • All the other items on the SOE page, with the exclusion of LDAP, NFS, dispense and most of the other user programs.

  • IPv6 configuration. Look at Motsugo's or Medico's config for an example.

Security

Security is paramount on a vm host because of the high potential for damage if the machine is compromised. Central fail2ban is set up to monitor the webpage and the ssh interface (see http://forum.proxmox.com/threads/3583-How-To-implement-Fail2Ban-on-Host and http://blog.extremeshok.com/archives/810), however it is imperative that central logging is configured and TESTED for this to work. The web interface must not be unfirewalled to outside the UCC network under any circumstances.

Post-install Configuration

The main thing that needs to be done post-install is to configure the storage locations. Go to Datacenter->Storage in the web interface and create a storage area that will hold vm images. Then disable image storage in the "local" storage area in /var/lib/vz. You may also wish to add an NFS location for iso's (yet to be created/decided at time of writing), as well as any other SAN/NAS vm storage space.

Authentication

Out of the box, the web interface uses the username root and the root password of the host. The LDAP implementation in Proxmox isn't "true" LDAP in that Proxmox only looks at LDAP for authentication and cannot consult LDAP for a list of users or group permissions. Other users can be added by creating their username in the web interface and setting the authentication realm to UCC's LDAP. The username must correspond to a UCC LDAP username.

To add yourself to the administrator's group, SSH to medico, and run something like:

pveum useradd accmurphy@uccldap -group Administrator -firstname ACC -lastname Murphy -email accmurphy@ucc.gu.uwa.edu.au

Alternatively, get another administrator to create your user through the web interface. Keep in mind that you must have a group or you will be unable to log in. Contact wheel if you are unable to login twice in a row or you will be locked out.

Storage

Virtual machines should be stored as .raw images in the appropriate vmstore area.

On Medico there are two vmstores;

  • /vmstore-local is a RAID1 volume on Medico's internal SSD's. It is fast, however it is also quite small and should only be used for UCC core servers

  • /vmstore-san is a RAID1/0 volume on the SAN attached via fibre channel. It can be used for member VM's and non-core servers as it has plenty of space

Permissions

TODO

Adding VM's

TODO

In the comments section on the summary page of the newly created VM, add a comment with the date of creation, the VM's purpose, the name and username of the owner.

Resizing VM's

Currently, the only way to resize a VM image is to use the command line on the host (just Medico for now). There is no way to shrink a volume once it has been grown, aside from copying the data to a new image, so be careful. Proxmox's command line tool for managing VM's is "qm" (try man qm and the command to resize an image file is qm resize. This tool has only been tested with the .raw format which the VM should be stored as, otherwise you're on your own, though it will probably work with any image stored as a plain file. Look at the man file for command syntax, however here is an example of resizing the image for the main virtio disk on VM 101 to 80GiB (which the guest will read as 85.9GB):

qm resize 101 virtio0 80G

The guest machine then needs to be rebooted to recognise the change in size, and the filesystem resized to use the extra space.